Plus or minus 3mm (0.125″) or 2%, whichever is greater. If you need a minimum width, please discuss with us.

Plus or minus 6mm (0.25″) or 2%, whichever is greater. Please note that all measurements are cut to cut and will therefore include a bottom skirt of about 8mm on end weld bags (apart from grip seal bags where length is measured from the grip seal to the bottom of the bag).

We work to +/- 10% of the gauge.

With regards to manufactured quantity, our standard tolerance will be +/- 10% of the quantity ordered. However with small quantity orders and certain bespoke products we may need to work up to +/- 25%.